Hanyoung Programmable Temperature Controller Model TH500
ข้อมูลสินค้า
-
รหัสสินค้า
TH5001
-
แก้ไขล่าสุดเมื่อ
01/12/2016 12:58
ดาวน์โหลดไฟล์ PDF
-
รายละเอียดสินค้า
- TH500
- - Color LCD screen with touch panel function
- Precise control
- 100 patterns(Total 2000 segments)
- Temperature & humidity independent PID control
- Various alarm functions
- Digital input 8 contacts, digital output 20 contacts
- Communication function (RS232, RS422 / 485)
Suffix code
Model Code Information TH500 
Programmable temperature & humidity controller Types 1 Standard
typeTemperature&Humidity Retransmission output Temperature&Humidity control output (SSR/SCR drive) Temperature&Humidity signal input External digital input (DI) : 8 contacts Digital output (DO) : relay 12 contacts, open collector & 8 contacts. Communication specification : RS232, RS422/485 2CH, USB 2 Additional
type※ Input and output boards are separated from the main body. Temperature/Humidity Retrasmission output Temperature/Humidity signal input Communication specification : RS232, RS422/485 2CH, USB (PV Backup) N - No body part Additional type
board
(optional)1 Input/Output board-1 (12 contacts relay output), Temperature/Humidity control output (SSR/SCR drive)
(DI : 8 contacts, D.O : 12 contacts relay output external power supply) 24 V d.c, 18 W2 Input/Output board-2 (8 contacts open collector output external terminal board) 3 Input/Output board-3 (8 contacts relay output board) 4 Input/Output board-1 + (output board-2) 5 Input/Output board-1 + (output board-3) N No output board (when selected the main body) Language N Korean / English (Standard type) 2 English / Chinese (Simplified Chinese Characters) 3 English / Chinese (Traditional Chinese Characters) 4 Korean / Chinese ( Simplified Chinese Characters) 5 Korean / Chinese (Traditional Chinese Characters) Specification
[Input] Temperature sensor(Dry) RTD (Pt100 Ω) or 0 - 5 V DC * 4 - 20 mA DC (External resistance 250 Ω)
* Pt100 Ω (IEC 751)Humidity sensor(Wet) Sampling time 500 ms Measurement range Temperature range : -100.00 ~ 200.00 ℃ Humidity range : 0.00 ~ 100.00 % RH Digital Input (DI) Total 8 contacts (1a 4 contacts x 2), 8 V DC 10 mA max Allowable wiring resistance Less than 10 Ω / 1 wire (Resistance value of 3 wires must be same) Input impedance Approx. 1 ㏁ (DC voltage input) Allowable signal source resistance Approx. less than 2 ㏀ (DC voltage input) input displaying resolving power Generally less than the decimal point of range
[Ferformance] Display accuracy Temperature (℃) : ±0.2 % of FS
Humidity (%RH) : ±2 % of FSInsulation resistance Above 20 ㏁, 500 V DC
(primary terminal-secondary terminal-between the earths)Dielectric strength 2500 V AC, 60 Hz, For 1 minute
(primary terminal-secondary terminal-between the earth terminals)
[Standard specification] Power supply voltage 100 - 240 V AC, 50 - 60 Hz Percentage of voltage fluctuation ±10 % of Power supply voltage Power consumption 20 VA Ambient temperature 0 ~ 50 ℃ Ambient humidity 20 ~ 90 % RH (Under the condition of no dew formed) Storage temperature -25 ℃ ~ 70 ℃ Vibration resistance 10 - 55 ㎐, Amplitude 0.75 mm, 3 direction, 4 times, 5 min/cycle Shock resistance 147 ㎨, To the direction of 3 for 3 times Dimension 183(W) x 96(H) x 94(D) Weight Approx. 2.35kg (included the weight of box)
[Control function] Input Input compensation
(sensor bias)
temperature 1 contact : -100.00 ~ +100.00 ℃
Humidity 1 contact: -100.00 ~ 100.00 % RHDry/wet bulb sensor
compensationRemove the gauze from wet bulb sensor and compensate
the difference between the wet and dry bulb sensor.Scaling DC Voltage (V DC) : Input scaling depending on the conversion range. Input filter (LPF) 2 ~ 180 sec Detection Input break UP scale, Stop operation when exceeded ±5 % of range limit. Control mode Operation method selection fixed control/Select programmable control Control output Temperature control output SSR output or SCR (2 - 20 mA DC) output selection Humidity control output Control action Pattern 100 patterns (1 pattern / 100 segments) Segment 2,000 segments max. PID group 16 group (4 temperature zones X 4 humidity zones) Auto tuning Auto tuning by the target set value Proportional band 0.00 ~ 100.00 % (ON / OFF control when 0.00 %) Integral time 0.00 ~ 6,000 sec (OFF state with 0 sec sestting) Derivative time ON/OFF control Set proportional band (P.B) as0.0 Direct/reverse control Depends on selection of direct/reverse action of control output. Hysteresis Temperature 0.1 ~ 300 ℃, humidity 0.1 ~ 100% Retransmission Output Temperature & humidity 4 - 20 ㎃ DC
Select among the present value(PV), set value(SV), and output value (MV)Scaling Auto scaling within set range (4 - 20 mA DC) Alarm setting Set alarm System alarm : 4 contacts.
4 contacts per pattern, ON/OFF set function per segmentAlarm type High/low alarm, High/low deviation alarm and etc (20 kinds) Absolute alarm set range Temperature : -100.00 ~ 200.00 ℃ Humidity : 0.0 ~ 100.0 % RH. Deviation alarm set range Temperature : -300.00 ~ 300.00 ℃ Humidity : -100.0 ~ 100.0 % RH. Hysteresis Temperature : - 0.0 ~ 300.0 ℃ Humidity : 0.0 ~ 100.0 % RH. Power backup memory Saving device Internal flash and FRAM, Temperature & Humidity each 86,400 point. Saving function Program information, SV backup and restoration,
Set value for temp & humidity, PV
[Output] Control output (DO) Relay contact 12 contacts N.O : 30 V DC 5 A max, 250 V AC 5 A max N.C : 30 V DC 1 A max, 250 V AC 2 A max Open collector 8 contacts 24 V DC 300 ㎃ max Control output SSR output ON : 24 V DC. pulse voltage (load resistance 800 Ω min)
OFF : less than 0.1 V DC proportion cycle : 1 - 1000 sec
Output limit : - 5.00 ~ 105.00 %
Time resolving power : smaller one between 0.1 % and 10 msCurrent output 4 - 20 ㎃ DC (3.2 - 20.8 mA DC)
renewal time : 500 ms
load resistance : 600 Ω max
output limit : - 5.00 ~ 105.00%Retransmission output Temperature & humidity 4.0 - 20.0 mA DC output renewal time 500ms Resistive load less than 600 Ω output limit - 5.00 ~ 105.00 % output types PV, SV, MV free choice Resolving power approximately 8,000 Renewal time 500ms
[Monitor specification] Screen standard Color STN LCD (115.17 x 86.37 mm) Number of Pixels 320 x 240 Pixel, 256 Colors Back light CCFL Back light life About 20,000 h Touch type Resistive Overlay type (4 wires) Language Korean / English English / Chinese (Simplified Chinese Characters)
English / Chinese (Traditional Chinese Characters)
Korean / Chinese ( Simplified Chinese Characters)
Korean / Chinese (Traditional Chinese Characters)
[Communication] Applicable rating EIA - RS232, RS485/422, USB V1.1 Max number of connection RS232 1 : 1 RS485/422 1 : 32(address 1 ~ 999) Communication type RS232 Full Duplex RS485/422 2 wires type half Duplex Synchronous type RS485/422 Asynchronous mode Communication distance USB V1.1 approximately within 1 m RS232 approximately within 10 m RS485/422 approximately within 1.2 km Commincation speed USB V1.1 approximately 1 Mbps RS232, RS485/422 9600 / 19200 / 38400 / 57600 / 115200 BPS Data Length RS232, RS485/422 7/8 Bits Parity Bit RS232, RS485/422 NONE / EVEN / ODD Stop Bit USB V1.1 1 / 2 Bit(s) Protocol RS232, RS485/422 PCLINK / PCLINK + CRC / MODBUS - RTU Response Time RS232, RS485/422 0 ~ 999 (ms)
