Mercotac Two Conductor
Model 205
Two Conductors,
4 Amps
|
 |
|
High-speed model available (205-H)
Low-torque/low-temp. models available (205-L)
Available with stainless steel ball bearing (205-SS) |
| Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque and low cost. |
|
|
| Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@240VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 205 |
2 |
0-250 |
4 |
200 |
|
<1m
|
 |
|
2000 |
140 (60) /45(7) |
75 |
|
>25M
|
|
|
| 205-SS |
2 |
0-250 |
4 |
200 |
|
<1m
|
|
|
2000 |
140 (60) /45(7) |
75 |
|
>25M
|
|
|
| 205-L |
2 |
0-250 |
4 |
200 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
20 |
|
>25M
|
|
|
| 205-LS |
2 |
0-250 |
4 |
200 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
75 |
|
>25M
|
|
|
| 205-H |
2 |
0-250 |
4 |
200 |
|
<1m
|
|
|
3600 |
140 (60) /45(7) |
35 |
|
>25M
|
|
|
| 205-HS |
2 |
0-250 |
4 |
200 |
|
<1m
|
|
|
3600 |
140 (60) /45(7) |
35 |
|
>25M
|
|
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball bearing
"H" designator indicates high RPM
"HS" designator indicates high RPM & stainless steel ball bearing
 Model 205 Accessories |
|
| Model 205 Connections |
| Model 205 Suggested Mounting Methods |
| Model 205 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine. When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Receptacle Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 591, 592, 594 |
.283" (7.19) |
.35" (8.89) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|
|
Model 230
Two Conductors,
30 Amps
|
 |
|
|
Disconnects included (4 lg.)
Boot kit available
Available with stainless steel ball bearing (230-SS) |
|
| Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@240VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 230 |
2 |
0-250 |
30 |
200 |
|
<1m
|
|
|
1800 |
140 (60) /-20(-29) |
200 |
|
>25M
|
|
|
| 230-SS |
2 |
0-250 |
30 |
200 |
|
<1m
|
|
|
1800 |
140 (60) /-20(-29) |
200 |
|
>25M
|
|
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
| Model 230 Accessories |
 |
 |
55251
Terminal 16 - 14 AWG
(qty. 2 included) |
57230
Boot Kit for dust / splash protection
IP51 |
|
 |
|
|
55250
16 - 14 AWG (qty. 2 included) |
|
|
|
|
|
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
|
|
| Model 230 Standard Wire Connections |
| Model 230 Wire Connections With Optional Boot Kit |
|
|
| Model 230 Suggested Mounting Methods |
| Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Typical Body Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 230 et al |
.998" (25.35) |
.80" (20) |
|
|
|
|
Typical Bushing Mount Hole Dimensions
|
| 230 et al |
.500" (12.70) |
.40" (10) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|
Model 235
Two Conductors,
2@30amps & 500V
|
 |
|
Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
ball bearing (235-SS) |
|
| Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@500VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 235 |
2 |
0-500 |
30 |
100 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
400 |
|
>50M
|
|
|
| 235-SS |
2 |
0-500 |
30 |
100 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
400 |
|
>50M
|
|
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
| Model 235 Accessories |
 |
|
|
57235
Boot Kit for dust or splash
protection IP51 |
55250
Terminal 16 - 14 AWG
(qty. 2 included) |
55251
Terminal 16 - 14 AWG
(qty. 2 included) |
| |
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
|
|
| Model 235 Standard Wire Connections |
| Model 235 Wire Connections With Optional Boot |
|
|
| Model 235 Suggested Mounting Methods |
| Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Typical Body Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 235, et al |
1.248" (31.7) |
.80" (20.3) |
|
|
|
|
Typical Bushing Mount Hole Dimensions
|
| 235, et al |
.748" (19.0) |
.80" (20.3) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|
Model
215-2K
Two Conductors,
2@15amps & 2,000V
|
 |
|
Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
ball bearing (215-2KSS) |
|
| Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@2000VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 215-2K |
2 |
0-2,000 |
15 |
100 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
400 |
|
>50M
|
|
|
| 215-2KSS |
2 |
0-2,000 |
15 |
100 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
400 |
|
>50M
|
|
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
| Model 215-2K Accessories |
|
 |
 |
57235
Boot Kit for dust or splash
protection IP51 |
552KA
Terminal 22 - 18 AWG
(qty. 4 included) |
55253
Shrink Tube
(qty. 4 included) |
| |
Terminals for 16-14 AWG wires available (p/n 552KB).
|
|
| Model 215-2K Standard Wire Connections |
| Model 215-2K Wire Connections With Optional Boot |
|
|
| Model 215-2K Suggested Mounting Methods |
| Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Typical Body Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 215-2K, et al |
1.248" (31.7) |
.80" (20.3) |
|
|
|
|
Typical Bushing Mount Hole Dimensions
|
| 215-2K, et al |
.748" (19.0) |
.80" (20.3) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|
