สร้างเว็บEngine by iGetWeb.com
Cart รายการสินค้า (0)

Datasensor เปิดตัว New S62-Y series, flexibility and accuracy

Datasensor เปิดตัว New S62-Y series, flexibility and accuracy
New S62-Y series, flexibility and accuracy

DATASENSOR introduces the new S62-Y displacement sensors with red class II Laser emission and micrometric resolution.
The S62-Y with optic triangulation, based on the CMOS technique, guarantees very precise displacement measurements as well as thickness and/or position verification.

HIGHLIGHTS
• Optic triangulation technology
• Red Class 2 Laser emission
• 80 ± 40 mm operating range
• Excellent linearity <0.1% f.s. and temperature drift <10µm/°C
• Excellent measurement resolution reaching 8µm
• 0.66ms response time with 750Hz switching frequency
• 0.5x0.7mm extremely focussed light spot at 100mm
• MASTER-SLAVE configuration for thickness measurement 3 signalling LEDs: digital output, power ON and alarm signal
• 2 push-buttons for easy calibration and configuration
• Graphic interface with RS485 communication protocol
• 0-10V or 4-20mA scalable analogue outputs
• PNP digital output
• PNOP alarm output
• Plastic housing with IP67 mechanical protection

The measurements carried-out by the S62-Y sensor are not influenced by the surface, colour and reflected light. The measurement field ranges from a minimum distance of 40mm to maximum distance of 120mm.

S62-Y sensors are ideal for applications with reduced spaces and offers a reduced response time (<666 µs) with a high measurement resolution reaching 8 µm.

The PC connection using the RS485 serial protocol and graphic user interface make sensor configuration and data control very intuitive and easy:

- Manages several sensors at the same time
- Measurement indicator with figures and graphic display
- Differential detection/reading comparison between pairs of sensors
- Data plotting to time/distance XY graph
- Graph windows may be saved in image format
- Acquired data may be saved in ASCII format
- Data may be saved to a binary meta-format file
- Event management and ASCII LOG file (alarms)
- The graphic structure makes the software easy to control through a touch-screen display.



The S62-Y series includes two different models, both with an additional alarm signal in case of low signal or
dirty lenses.

The S62-Y series is particularly suitable for position and/or thickness measurements on automatic machines for
part test & assembling, wood-working machines, surface profile control, robot arm guiding, metal-working
machines, contour measurements on aluminium wheels and part measurements in general.









Tags :

view