สร้างเว็บEngine by iGetWeb.com
Cart รายการสินค้า (0)

Bevel Gear Box เฟืองเดือยหมู ยี่ห้อ Makishinko ประเทศญี่ปุ่น

Bevel Gear Box เฟืองเดือยหมู ยี่ห้อ Makishinko ประเทศญี่ปุ่น

Bevel Gear Box เฟืองเดือยหมู ยี่ห้อ Makishinko ประเทศญี่ปุ่น

 
 


Bevel Gear Box เฟืองเดือยหมู ยี่ห้อ Makishinko ประเทศญี่ปุ่น

Bevel Gear Box เป็นเกียร์ที่นอกจากใช้ในการส่งกำลังแล้ว ยังทำหน้าที่เปลี่ยนทิศทางของแรงด้วย มีืั้ทั้งแบบใ้ห้รอบเหมือนเดิม และหรือเพิ่มมากขึ้นจากเดิม คือมีแบบอัตราทด 1:1 และ อัตราทด 1:2 


[คุณลักษณะ]
1. เสียงเงียบ : แม้ทำงานที่รอบสูง และวิ่งเรียบสม่ำเสมอ
2. กระทัดรัด น้ำหนักเบา : สมรรถนะการทำงานสูง พร้อมด้วยการออกแบบให้มีรูปร่างกระทัดรัดและน้ำหนักเบา
3. แข็งแรงและทนทาน : เลือกใช้เฟืองเกียร์และลูกปืนที่มีความทนทานสูง ทำให้สามารถต้านทานการใช้งานหนักได้
4. ประโยชน์ใช้สอยกว้างขวาง : มีลักษณะการจัดเรียงตัวของเพลาให้เลือกถึง50แบบ สำหรับการติดตั้งหลากชนิด นอกจากนั้น ยังมีอัตราทดให้เลือก 2 แบบคือ 1:1 และ 1:2 ให้เลือกใช้ตามชนิดของงานได้

[โครงสร้าง ]
1.วัสดุที่ใช้ ในการผลิตเกียร์ได้ผ่านการคัดสรรเป็นพิเศษเพื่อความทนทาน เกียร์ทุกชิ้นผ่านการขัดผิวอย่างละเอียดภายหลังจากการผ่านขบวนการชุบแข็ง ด้วยความร้อน เพื่อสร้างความมั่นใจในเรื่องคุณภาพ
2. เลือกใช้เหล็กคาร์บอนที่ผ่านขบวนการชุบแข็งด้วยความร้อนมาทำเป็นเพลา เพื่อป้องกันการบิดงอจากแรงโมเม้นต์เวลาใช้
3. ใช้ลูกปืนแบบเตเปอร์เพื่อรับแรง(Load)ทั้งในแนวรัศมีและthrust loadของแต่ละแกน
4. ตัวเสื้อทำจากเหล็กหล่ออย่างดี
5. ระบบการหล่อลื่นเป็นแบบอ่างน้ำมัน ทำให้สามารถพ่นน้ำมันให้เกียร์และลูกปืนอย่างเพียงพอ
6. ในเรื่องระบบซีล ใช้ซีลน้ำมันในส่วนที่ต้องเคลื่อนที่ และO-Ringกับปะเก็นในส่วนที่เป็นพื้นที่เปิด เพื่อป้องกันการรั่วไหลของน้ำมัน

Bevel gear box SB, FB and TB Series miter gears

Answering your needs with a rich product lineup and a record of success

These bevel gear boxes have been successful throughout the power transmission field as a result of flexible combinations of attachment configurations, shaft layouts and rotation directions as well as in combination with other machinery such as screw jacks.

Bevel gear box SB, FB and TB Series miter gears

SB Series bevel gear box

Features
Quiet operation The SB Series offers high-speed rotation and smooth operation.
Compact and light weight Take advantage of large capacity in a compact and light weight design.
Powerful and tough In addition to the gears and bearings, sufficient care has also been taken to provide strength and ensure enough power and toughness to provide many years of durability.
A wide range of uses 50 different shaft layouts are available to respond to any possible mounting scenario. Gear ratios can be selected to match the application with 1/1 and 1/2 available.
[SB Series]

[SB Series]

Structure
This series uses a spiral bevel gear. After a special steel is heat treated, it is finished with lapping to improve accuracy.
The shaft is made of heat-treated carbon steel in order to provide sufficient durability versus bending force.
A tapered roller bearing is used to receive the radial load and thrust load of each shaft.
The shaft layout is such that shaft "A" is supported with cantilever support while shaft "B" is supported from both sides. (However, in units with bearing housings, both shafts "B" and "C" are supported with cantilever support.)
The housing is a strong cast steel box.
Bevel gear boxes are lubricated with oil bath lubrication. The bottom of the gear case is an oil reservoir and as a part of the gear rotates through the oil, small droplets of oil are splashed throughout the inside of the gear case and lubricate the gear and bearing.
Bevel gear boxes use an oil sheet to seal the rotating parts and an O-ring or liquid packing for fixed parts to ensure that liquids do not leak outside.

FB Series bevel gear box

Features
Tough design This design is strong enough to provide the durability required for industrial machinery subjected to severe usage.
Compact and light weight This design has been optimized to be lightweight and compact.
A wide variety of options - Shaft layout: 6 varieties
- Models: 5 varieties
- Speed ratios: 3 varieties including 1:1, 1.5:1, 2:1
Select the optimal model for each application.
Applications - Agricultural machinery
(Often used in working equipment for tractors in particular)
- Industrial machines
(Used for changing shaft direction and splitting power)
[FB Series]

[FB Series]

Structure
This series uses a straight bevel gear. A special steel is heat treated, ensuring sufficient durability for high transmission capacity.
The shaft is made of carbon steel or a specialty steel in order to provide sufficient durability versus bending force.
A tapered roller bearing is used. Cantilever support is provided for shaft "A" and double-sided support is provided for shaft "B." The bearings receive the thrust and radial load of each shaft.
The housing is manufactured from gray cast iron.
This series uses oil bath lubrication.

TB Series bevel gear box

Features
Light weight and durable The case is manufactured from a corrosion resistant aluminum alloy with a baked finish for superior durability combined with light weight.
Flexible installation direction It is possible to install the unit in any direction and installation is easy.
Low noise and high efficiency A spiral bevel gear is used that is heat-treated before lapping to produce smooth operation.
Maintenance free design Long-term use is possible because the unit is filled with high-grade grease.
Usable with special products When an application requires corrosion resistance, Makishinko can also use stainless steel for the shaft.
[TB Series]

[TB Series]

Structure
This series uses a spiral bevel gear. After a special steel is heat treated, it is finished with lapping to improve accuracy.
The shaft is made of heat-treated carbon steel in order to provide sufficient durability versus bending force.
The bearing is a deep groove ball bearing.
Shaft "A" is supported with cantilever support while shaft "B" is supported from both sides.
The housing is manufactured from corrosion resistant aluminum alloy.

Tags : Makishinko  Bevel Gear Box  SB  LB  TB  FB  Makishinko  เฟืองเดือยหมู

view